| |
|
Deformation Measuring System
|
|
Cableless tube measurement with exact measuring results.
A qualitative tube and sewer inspection alone does not allow to budget the tube refurbishment as economical as possible. The deformation and calibre measuring system KDMS is the right tool to measure the tube diameter in a cost-efficient way either separately or during the TV camera inspection. A robust mechanical sampling procedure is used for this purpose. |
| Part-No. |
Specification |
Measuring range |
| 19911750 |
Measuring probe, type KDMS 150 |
DN 150-400 |
| 19911751 |
Measuring probe, type KDMS 400 |
DN 450-800 |
| 19911755 |
Extension set of type KDMS to measure nominal sizes ND 800-1200 mm |
DN 800-1200 |
| 19911756 |
Data logger of KDMS |
|
| 19911753 |
Evaluation software of KDMS |
|
| 19911752 |
Measuring data export: Excel to KDMS |
|
|
|
|
| Measuring probe - type KDMS 150 |
 |
Main areas of application:
- Calibre definition for refurbishment
- Quality control after refurbishment
- Deformation measurements as part of the quality assurance
Part No. 19911750 |
| Measuring range: |
ND 150 - ND 400 |
| Compability : |
Suitable for any TV inspection system (specify socket standard please) |
| Measuring accuracy: |
1 mm, TÜV certified |
| Power supply: |
Li-Ion battery inside the data logger, max. measuring time approx. 12 hours, after complete battery recharging |
| Continuous measurements: |
along the complete measuring distance |
| Step width: |
Adjustable (2 cm) |
| Storage of the measuring data: |
Internal, via SD card |
| Calibration certificate: |
Certification of the complete measuring range of 150-400 mm. Minimum and maximum values of the measuring ranges specified |
| Measuring probe - type KDMS 400 |
 |
Main areas of application:
- Calibre definition for refurbishment
- Quality control after refurbishment
- Deformation measurements as part of the quality assurance
Part No. 19911751 |
| Measuring range: |
ND 450 - ND 800 - special version for ND 800 - 1200 available as an add-on set |
| Compability : |
Suitable for any TV inspection system (specify socket standard please) |
| Measuring accuracy: |
1 mm, TÜV certified |
| Power supply: |
Li-Ion battery inside the data logger, max. measuring time approx. 12 hours, after complete battery recharging |
| Continuous measurements: |
Along the complete measuring distance |
| Step width: |
Adjustable (2 cm) |
| Storage of the measuring data: |
Internal, via SD card |
| Calibration certificate: |
Certification of the complete measuring range of 450-800 mm. Minimum and maximum values of the measuring ranges specified |
|
|
|
| Data logger of KDMS 150-800 |
 |
The cableless data logger allows for longer measuring distances within the same time. The shorter time needed for the deformation and calibre measurements will help to reduce cost.
- Data logger and PC communicate via wireless radio connection.
Part No. 19911756 |
| Operation: |
Cableless / no limitation of measuring distance due to limited cable length |
| Data storage: |
SD card |
| Measuring distance limits: |
> 100,000 m |
|
Power supply:
|
- Integral Li-Ion battery
- Supplies power to the data logger and measuring probe
- Max. measuring time approx. 12 hours - after complete battery recharging
|
| Distance counter : |
integrated |
| Functions : |
Start, stop, measurement, data transfer to the evaluation software |
|
Communication with laptop computer:
|
- Radio connection (2.4 GHz)
- Operating distances:
- 100 m (outdoor)* to start, stop, data transfer (* obstacles, e. g. walls of buildings, affect radio connection and reduce the radio range)
Measurements inside the tube are independent. |
|
|
|
|
Evaluation software of the measuring instrument KDMS type 150 und type 400
Part No. 19911753 |
 |
|
Documentation : |
- Graphic representation of the vertical and horizontal diameters along the distance
- Representation of the upper and lower tolerances
|
|
|
|
| |
| |
