| |
| KRD-Rotating Nozzle TYPE RDA |
|
|
The combination of radial and semi-radial jets makes the KRD Rotating Nozzle an inevitable tool on any water jet truck.
Use areas:
-
pipe sizes between DN 25 (1") and DN
-
to remove hardened sludge, fine roots, minor incrustations and greasy slime
-
we recommend the Multi Power Nozzle for nominal sizes of DN 200(8") and for water recycling systems.
Function:
The radial jet with an angle of 90° to the wall and the two semi-radial jets with a backward angle of 43° provide the cleaning effect and traction. The high impact energy of the 90° jet displaces the deposits, the semi-radial jets carry them away.
|
 |
| EHLE-No. |
Name |
IG thread |
weight kg |
Lxdia (mm) |
Inserts |
use at |
| 11001035 |
KRD-Rotating Nozzle |
IG 1/8" |
0,04 |
36 x 16 |
4 drilled |
25 mm |
| 11001037 |
" |
IG 1/4" |
0,04 |
36 x 16 |
4 drilled |
25 mm |
| 11001038 |
" |
IG 1/4" |
0,1 |
50 x 22 |
4 drilled |
40 mm |
| 11001039 |
" |
IG 1/4" |
0,2 |
55 x 28 |
3 x M4 |
40 mm |
| 11001040 |
" |
IG 1/2" |
0,6 |
78 x 40 |
3 x M6 |
60 mm |
| 11001041 |
" |
IG 3/4" |
0,6 |
78 x 40 |
3 x M6 |
60 mm |
| 11001043 |
" |
IG 1" |
1,4 |
96 x 60 |
9 x M6 |
100 mm |
|
| |
| |
| HRR Rotating Nozzle TYPE RDB |
 |
The 4 backwards cutting jets ensure both traction and cleaning perfomance. They operate as rotating and thrust jets.
Use areas:
-
for pipe sizes between DN 50 (2") and DN 400(16")
-
to remove deposits, fine roots or minor incrustations
-
we recommend our Multi-Power Nozzles for nominal sizes of DN 200 (10") and above as well as for water recirculator systems.
|
 |
| EHLE-No. |
Name |
IG thread |
weight kg |
Lxdia (mm) |
Inserts |
use at |
| 11001008 |
HRR-Rotating Nozzle |
IG 1/8" |
0,04 |
36 x 16 |
4 drilled |
25 mm |
| 11001010 |
" |
IG 1/4" |
0,04 |
36 x 16 |
4 drilled |
25 mm |
| 11001007 |
" |
IG 1/4" |
0,1 |
50 x 22 |
4 drilled |
40 mm |
| 11001011 |
" |
IG 1/4" |
0,2 |
55 x 28 |
4 x M4 |
40 mm |
| 11001012 |
" |
IG 1/2" |
0,6 |
78 x 40 |
4 x M6 |
60 mm |
| 11001013 |
" |
IG 3/4" |
0,6 |
78 x 40 |
4 x M6 |
60 mm |
| 11001015 |
" |
IG 1" |
1,5 |
96 x 60 |
6+4 M6 |
100 mm |
| |
| |
| |
|
| Spinning Nozzle TYPE RDC |
|
|
Due to its eccentric design, this spinning nozzle produces pipe vibrations and can displace the most resistant deposits.
Use areas:
|
| EHLE-No. |
Name |
IG thread |
weight kg |
Lxdia (mm) |
Inserts |
use at |
| 11001050 |
Spinning Nozzle KRD |
IG 1/2" |
0,6 |
78 x 40 |
3 x M6 |
60 mm |
| 11001052 |
" KRD |
IG 3/4" |
0,6 |
78 x 40 |
3 x M6 |
75 mm |
| 11001055 |
" KRD |
IG 3/4" |
1,4 |
96 x 60 |
3 x M6 |
100 mm |
| 11001051 |
" HRR |
IG 1/2" |
0,6 |
78 x 40 |
4 x M6 |
60 mm |
| 11001053 |
" HRR |
IG 3/4" |
0,6 |
78 x 40 |
4 x M6 |
75 mm |
| 11001056 |
" HRR |
IG 3/4" |
1,4 |
96 x 60 |
4 x M6 |
100 mm | |
| |
| |
| |
